Gate Flash lamp F5001 with bulb
Promotional auto gate flash lamp F5001 with bulb inside
If you have your own design, please contact us, there will have a professional customer service to communicate with you.
Don't have your files right now?No worries, Check out our art tips for more information.
If over 500pcs, mass production will start until pre-production sample has been approved.
Est. 7 days production
|Working temperature||-20 ℃ to 60℃|
|Working voltage||24V AC/DC|
Gate Flash lamp F5001 with Bulb
I. Technical Specification
1. working voltage：24V AC/DC
2. Loading capacity：less than 16W
3. Flicker Frequency：1HZ
4. Working temperature：-20º～+60℃
5. IP Level: IP54
6. Size：φ90* 125mm
II. Connecting Instruction
1. Connect the wire with J1 if power supply is 24V AC/DC
2. J2 is for connecting the antenna to extend the effective distance of controller
4.1 Bulb will flicker in 1HZ after power on
4.2 JP1 switch
It’s the switch for switching bulb in flickering or lighting, When JP1 at FLASH, bulb will flicker in 1HZ after power on; When JP1 at NO FLASH, bulb will light after power on
No need register, just fill in contact info below, we will reply you within 24 hours!
Enter the code in the box below: