2-channel open code receiver R5112

open code cable connection auto door receiver

$??.00

Have chosen: There are no options selected.

Order After Login

Added To Cart Successfully!

2-channel open code receiver R5112

2-channel open code receiver R5112

open code cable connection auto door receiver
     
PriceShow price after login

If you have your own design, please contact us, there will have a professional customer service to communicate with you.

Don't have your files right now?No worries, Check out our art tips for more information.

If over 500pcs, mass production will start until pre-production sample has been approved.

Est. 7 days production

Open code Gate Receiver R5112 ,working with other brand transmitter

I. Safety Instruction
1.For security, please read instructions carefully before initial operation; making sure that the power is off before connection. 
2.  Please clear the memory before initial operation. (Ref: Erasing ALL learned/memorized Transmitters)
3.Do not learn the remote control when motor is operating in order to avoid mis-operation.
4.The received signal may be interfered by other communication devices. (e.g. the wireless control system with the same frequency range)
It is forbidden to control the high-risk coefficient equipment / system. (e.g. cranes)
6. It is used only for the manual remote control and wireless control equipment / system which must not endanger life or property 
during running failure, or its security risks have been eliminated
7. It should be applied in dry indoor place or in the electric appliance place.
8. If connected wire is too long , the receiver may work unstable

II. Technical parameters                                    

1. Working voltage:12-24VAC/DC 
2. Temperature range:-20℃ to 60℃
3. Working frequency:433.92MHz
4. Stored transmitters: Rolling code 300PCS 
5. Relay contact load capacity::1A,30V DC

III. Set up and working process
1. Learning transmitter: Press the learning button of the receiver, then LED is red. Press any one of the transmitter twice times, LED flickers and continues on several seconds, then off. It is indicated the learning is successful.
2. Deleting transmitter: Press the learning button for a long time, the indicating lamp is red for 8 seconds, and then off, release the learning button, LED is red for 2 seconds and then off; complete the deleting transmitter.
3. Latch and non-latch: Latch A is for channel 1,B is for channel 2. It’s non-latch when no jumper on LATCH, It’s latch when there’s jumper on LATCH.
4. Self-learning function: Use the transmitter that already has been learned as old transmitter, press button 1 and button 2 at the same time and then press button 2 to let the receiver enters into the learning process .In this way , new transmitter can be learned refer 4.1 without press the learning button S1 on the receiver.

IV. Operation
1. Transmitter button 1 controls receiver channel 1, transmitter button 2 controls receiver channel 2, no matter users use button 1 to learn or button 2
2. Transmitter button 3 controls receiver channel 1, transmitter button 4 controls receiver channel 2, no matter users use button 3 to learn or button 4
3. Non-latch: Keep pressing the button, receiver starts working. Release the button, receiver stops working .
4. Latch: Press the button, receiver starts working. Press button again, receiver stops working .
5. The function of latch/non-latch for channel 1 and channel 2 is separate and it could be set up according to users’ requirement.

 
Product details
Certification CE, FCC, RoHS
Channel2
Code open code
Connection style Cable connection
Frequency433.92MHz
Latch/Non-latch Latch and non-latch switchable
Loading capacity 1A, 30VDC
Product size 6.0*3.5*2.2cm
Product weight 42g
Transmitters stored 300pcs
Working temperature -20 ℃ to 60 ℃
Working voltage 12 -24VAC/DC
HILAND TECHNOLOGY
15 YEARS EXPERIENCE WITH HIGH QUALITY ASSURANCE
Established in March, 2004, Hangzhou Hiland Technology Co., Ltd is a professional designer and qualified manufacturer for automatic control systems. Hiland serve programmable wireless transmitter, receiver, tubular motor receiver, sliding gate control board, roller shutter control board ,flash lamp, photocell and wireless keypad. Hiland brand products with unique design have been approved by ISO9001-2008, CE(EMC,LVD,RF),C TICK,EN12978,ROHS,etc. strict requirements, and sell well in Europe, Asia, Middle east, North America, etc.Hiland have improved SAMSUNG SMT machine and soldering machine, ICT test, FCT test to guarantee PCBA with high quality.
OUR ADVANTAGE
Reseach and development
Export-oriented manufacturing enterprises, independent research and development, its own brand.
Advanced technology
Can be programmed to a variety of advanced products, to ensure the production of high quality.
Authority authentication
Have been approved by ISO9001-2008, CE(EMC,LVD,RF),C TICK,EN12978,ROHS,etc. strict requirements.
FACTORY PICTURES
CERTIFICATION SIGNS

 

No need register, just fill in contact info below, we will reply you within 24 hours!

Enter the code in the box below: