Tubular Motor Receiver TM5151

I. Specification

 1 .Working voltage: 220VAC,50HZ
 2.  Loading capacity: 2HP，240VAC
 3. Working frequency: 433.92MHz
 4. Built-in fuse: electrocircuit (0.5A), motor (10A)
 5. Temperature range: -20℃ to 60℃.
 6. Code:Rolling code
 7. Size: 113×74×44MM,power wire 1500mm

Ⅱ. Safety Instruction

 1. For security, please read the instructions carefully before initial operation; making sure that the power is off before connection.
 2. The received signal may be interfered by other communication devices. (e.g. the wireless control system with the same frequency range)
 3. It is forbidden to control the high-risk coefficient equipment / system. (e.g. cranes)
 4. It should be applied in dry indoor place or in the electric appliance place.

III. Operation

 1  Learning / memorizing transmitters:
 Press the learning button on the panel,LED turns into red and gets into learning state;press the same button twice on the same transmitter,LED blinks for a while and turns into green shows transmitter has been learned  successfully.

 2. Erasing Transmitter：
  Continue pressing the learning button (about 8s) until LED turns green then release the learning button, LED turns red (about 1s) then turns green. It indicates that the erasing process is successful.