tubular motor receiver TM5201

Sliding gate tubular motor receiver

Message

$??.00

Have chosenThere are no options selected.

Add To Cart Successfully!

SEND INQUIRY
tubular motor receiver TM5201
tubular motor receiver TM5201
tubular motor receiver TM5201
tubular motor receiver TM5201

tubular motor receiver TM5201

Sliding gate tubular motor receiver

  • Item No.TM5201
    MOQ42 pcs
  • Product size12 x 7.6 x 4.6 cm
    Product weight404 g
  • CTN. Spec 36.5*33.5*16 cm / 42pcs
    G.W/N.W17 / 16 kg
Trade Assuranceprotects your orders
On-time Dispatch Guarantee
On-time dispatch is guaranteed or you will be eligible to claim platform compensation.
Refund Policy
If the shipment is delayed or product quality differs from what are specified in the online order, you can claim for a refund.
Quick refund: If you can apply for a refund within two hours of making a payment, you will receive a refund immediately.

If you have your own design, please contact us, there will have a professional customer service to communicate with you.

Don't have your files right now?No worries, Check out our art tips for more information.

If over 500pcs, mass production will start until pre-production sample has been approved.

Est. 7 days production

I. Specification

 1. Working voltage: 220VAC 50HZ                                                  
 2. Loading capacity: 2HP,240VAC                                                                                      
 3. Working frequency: 433.92MHz                                                                 
 4. Built-in fuse: electrocircuit (0.5A), motor (10A)                               
 5. Temperature range: -20℃ to 60℃.                                                
 6. Code:Rolling code                                
 7. Size: 113×74×44MM        

II. Safety Instruction

 1. For security, please read the instructions carefully before initial operation; making sure that the power is off before connection.
 2. The received signal may be interfered by other communication devices. (e.g. the wireless control system with the same frequency range)            
 3. It is forbidden to control the high-risk coefficient equipment / system. (e.g. cranes)
 4. It should be applied in dry indoor place or in the electric appliance place. 

III. Set Up

 1.  Learning / memorizing transmitters: Press the learning button on the panel,LED turns into red and gets into learning state;press the same button  twice on the same transmitter,LED blinks for a while and turns into green shows transmitter has been learned  successfully.              
 2. Erasing Transmitter:Continue pressing the learning button (about 8s) until LED turns green then release  the learning button, LED turns red (about 1s) then turns green. It indicates that the erasing process is successful.   

 IV. Operational process

 5.1 Three button control system with transmitter Button 1,2,3 in transmitter is in correspondence with open, close and stop.   
 5.2 Single button control system Press-Open(motor works clockwise), press-stop, press-close(motor works anti clockwise),press-stop,and so on in a loop.Single-  button control is only effective to the learned button; if a new button of transmitter learned into the control panel, the  former one is useless. (e.g.: if learned button ① at first, and then button ② or ③, the former button ①becomes invalid).  
 5.3 Infrared sensor protection It only work when door closing. Motor stops after 1 second and reverse when photocell signal disconnecting during door  closing.  (External photocell PHOTO port connects photocell normally close switch)


NOTE:                           
 1. Single-button control refers to single button in transmitter; ▲ ■ ▼ in control panel is in correspondence with open, close and stop.
 2. Max running time means that the motor’s maximum running time at a time is 100S; the motor stops immediately if longer than 100S.    
 3. ▲ ■ ▼ in control panel and OPEN STOP CLOSE button in transmitter are in correspondence with open, close and stop. 

HILAND TECHNOLOGY
19 YEARS EXPERIENCE WITH HIGH QUALITY ASSURANCE
Established in March, 2004, Zhejiang Hiland Technology Co., Ltd is a professional designer and qualified manufacturer for automatic control systems. Hiland serve programmable wireless transmitter, sliding gate opener, receiver, tubular motor receiver, sliding gate control board, roller shutter control board, flash lamp, photocell and wireless keypad. Hiland brand products with unique design have been approved by ISO9001-2008, CE(EMC,LVD,RF), C-TICK, EN12978, RoHS ,etc. strict requirements, and sell well in Europe, Asia, Middle east, North America, etc.Hiland have improved SAMSUNG SMT machine and soldering machine, ICT test, FCT test to guarantee PCBA with high quality.
OUR ADVANTAGE
Reseach and development
Export-oriented manufacturing enterprises, independent research and development, its own brand.
Advanced technology
Can be programmed to a variety of advanced products, to ensure the production of high quality.
Authority authentication
Have been approved by ISO9001-2008, CE(EMC,LVD,RF),C TICK,EN12978,ROHS,etc. strict requirements.
FACTORY PICTURES
CERTIFICATION SIGNS

 

Send your message to us

No need register, just fill in contact info below, we will reply you within 24 hours!

Captcha