Tubular motor receiver TM7000
Wall switch built-in mini type gate entry tubular motor receiver TM7000
If you have your own design, please contact us, there will have a professional customer service to communicate with you.
Don't have your files right now?No worries, Check out our art tips for more information.
If over 500pcs, mass production will start until pre-production sample has been approved.
Est. 7 days production
|Build-in fuse||No fuse|
|Connect with||external switch|
|Control||three buttons control|
|External switch one button& three button||2 buttons|
|Installation position||wall switch built-in type|
|Loading capacity||1.67A/ 230VAC|
|Running time||3-100S adjustable|
|With push buttons||No|
|Working temperature||-20 ℃ to 60 ℃|
|Working voltage||85 -265VAC (220VAC 50HZ or 110V AC 60HZ could be selected depending on the motor)|
Packaging & Delivery
- Selling Units:
- Single package size:
- 5.6 x 4.2 x 3 cm
- Single gross weight:
- 51 g
- Packing size:
- 38 x 37 x 20 cm
- Packing gross weight:
- 11 g
- Packing net weight:
- 9.4 g
- Packing quantity:
- 240 pcs
Tubular motor receiver TM7000 Loading capacity 1.67A/ 230VAC
I. Safety Instruction
1. For security, please read the instructions carefully before initial operation; making sure the power is off before connection.
2. Don’t touch any part of the product including antenna after power on to avoid electric shock.
3. Please clear the memory before initial operation. (Ref. Erasing ALL learned / memorized transmitters）
4. Do not learn the remote control when the motor is operating in order to avoid mis-operation.
5. The received signal may be interfered by other communication devices. (e.g. the wireless control system with the same frequency range)
6. It is forbidden to control the high-risk coefficient equipment / system. (e.g. cranes)
7. It is used only for the manual remote control and wireless control equipment / system which must notendanger life or property during running failure, or its security risks have been eliminated.
II. Technical parameters：
1. Working voltage: 85-265VAC (220VAC 50HZ or 110VAC 60HZ could be selected depending on the motor)
2. Temperature range：-20℃ to 60℃
3. Loading capacity：1/6HP, 250V
4. Built-in fuse：No fuse
5. Working frequency：433.92MHz
6. Transmitter stored：30pcs
7. Mother transmitter can be learned automatically when power on, child transmitter can be learned with mother transmitter.
8. It can connect external control switch (open, close)
9. Press STOP and UP two buttons on mother transmitter for about 8 seconds can change the running direction of motor.
10. Press STOP and DOWN two buttons on mother transmitter for about 8 seconds can adjust the max running time of motor.
No need register, just fill in contact info below, we will reply you within 24 hours!
Enter the code in the box below: