auto gate system tubular motor receiver TM5202
door/window control tubular motor receiver
If you have your own design, please contact us, there will have a professional customer service to communicate with you.
Don't have your files right now?No worries, Check out our art tips for more information.
If over 500pcs, mass production will start until pre-production sample has been approved.
Est. 7 days production
|Build-in fuse||electrocircuit (0.5A), motor (10A), please exchange appropriate fuse according to loading capacity|
|Control||one button control|
|External switch one button& three button||No|
|Installation position||outside type|
|Loading capacity||2HP, 250V|
|Suitable tubular motor||35mm，45mm，55mm，59mm，64mm，92mm，115mm|
|With push buttons||Yes|
|Working temperature||-20℃ to 60℃|
|Working voltage||220V AC, 50Hz|
1. Working voltage: 220V AC, 50Hz
2. Loading capacity: 2HP，250V
3. Working frequency: 433.92MHz
4. Built-in fuse: electrocircuit (0.5A), motor (10A), please exchange appropriate fuse according to loading capacity
5. Transmitters stored: 30
6. Temperature range: -20℃ to 60℃.
7. Self-learning function
8. Size: 113×74×44MM
Ⅱ. Safety Instruction
1. For security, please read the instructions carefully before initial operation; making sure that the power is off before connection.
2. Please clear the memory before initial operation. (Ref. Erasing ALL learned/memorized Transmitters）
3. Do not learn the remote control when the motor is operating in order to avoid mis-operation.
4. It should be applied in dry indoor place or in the electric appliance place.
1. Learning / memorizing transmitters: Press the learning button on the panel,LED turns into red and gets into learning state;press the same button. twice on the same transmitter,LED blinks for a while and turns into green shows transmitter has been learned successfully.
2. Erasing Transmitter：Continue pressing Learning Button for 8 seconds,turn LED turn Green, then release transmitters,the learning button,LED turn Red to begin erase the learned .until LED turn green, the Erase process is successful.
3. Photocell :If no photocell,the photocell switch should be connected with short lines; or the door cannot be closed.
No need register, just fill in contact info below, we will reply you within 24 hours!
Enter the code in the box below: