door/window control tubular motor receiver
≥42 pcss
$11.80
I. Specification
1. Working voltage: 220V AC, 50Hz
2. Loading capacity: 2HP,250V
3. Working frequency: 433.92MHz
4. Built-in fuse: electrocircuit (0.5A), motor (10A), please exchange appropriate fuse according to loading capacity
5. Transmitters stored: 30
6. Temperature range: -20℃ to 60℃.
7. Self-learning function
8. Size: 113×74×44MM
Ⅱ. Safety Instruction
1. For security, please read the instructions carefully before initial operation; making sure that the power is off before connection.
2. Please clear the memory before initial operation. (Ref. Erasing ALL learned/memorized Transmitters)
3. Do not learn the remote control when the motor is operating in order to avoid mis-operation.
4. It should be applied in dry indoor place or in the electric appliance place.
Ⅳ Operation
1. Learning / memorizing transmitters: Press the learning button on the panel,LED turns into red and gets into learning state;press the same button. twice on the same transmitter,LED blinks for a while and turns into green shows transmitter has been learned successfully.
2. Erasing Transmitter:Continue pressing Learning Button for 8 seconds,turn LED turn Green, then release transmitters,the learning button,LED turn Red to begin erase the learned .until LED turn green, the Erase process is successful.
3. Photocell :If no photocell,the photocell switch should be connected with short lines; or the door cannot be closed.
Scan the QR code with your phone, or visit the URL