Ⅰ Safety Precautions

1．For safety, please read the instructions carefully when using this product for the first time, and make sure to disconnect the power before connecting.

2．Clear storage on first use.

3. Try not to learn when the motor is running to prevent misoperation.

4．The signal received by this product may be affected by other communication equipment（Example of a wireless control system operating in the same frequency range）

5．It is forbidden to use this product to remotely control equipment/systems with a high risk factor （Example crane）

6．This product is only used for manual remote control and wireless receiving equipment/systems that will not cause harm to life and property in the event of failure; equipment/systems that have eliminated potential safety hazards.

Ⅱ technical parameter

1. Working voltage: 110VAC, 50/60Hz

2. Temperature range: -20℃ to 60℃

3. Load capacity: 2HP, 250V

4. Built-in fuse: 10A, 0.5A (circuit)

5. Operating frequency: 433.92MHz

6. Storage remote control: 30PCS

7. Can control two motors at the same time (two motors work at the same time, stop at the same time, jog, and linkage can be adjusted.)

8. There is a self-test function before the motor starts (automatically detects whether the motor is connected)

9. After any one motor is overheated, the two motors will stop at the same time

10. The maximum running time of the motor can be set to 5-100S (S3 button setting)

11. With LED lighting indication function (LED is on when the motor is working, LED is off when the motor is stopped)

12. With external PVC buttons - UP, STOP, DOWN

13. Size: 180*61*150