Rolling shutter motor control board RS0103
Adjustment soft start and soft stop rolling shutter control board
- Item No. RS0103MOQ 60 PCS
- Product size 13 x 13 x 16.5 cmProduct weight 201 g
- CTN. Spec 40.5*45.5*25 cm / 60PCSG.W/N.W 12 / 9.6 kg
Choice

If you have your own design, please contact us, there will have a professional customer service to communicate with you.
Don't have your files right now?No worries, Check out our art tips for more information.
If over 500pcs, mass production will start until pre-production sample has been approved.
Est. 7 days production
Rolling shutter motor control board RS0103
I.Technical parameters
1. Working voltage: 24V AC
2. Temperature range:-20℃ to 60℃
3. Loading capacity:100W, 24VDC
4. Built-in fuse: motor (10A), electric circuit (0.5A). please exchange appropriate fuse according to loading capacity
5. Working frequency: 433.92MHz
6. Stored transmitters: 30pcs
II.Safety Instruction
1. For security, please read instructions carefully before initial operation; making sure that the power is off before connection.
2. Please clear the memory before initial operation. (Ref: Erasing ALL learned/memorized Transmitters)
3. Do not learn the remote control when motor is operating in order to avoid mis-operation.
4. The received signal may be interfered by other communication devices. (e.g. the wireless control system with the same frequency range)
5. It is forbidden to control the high-risk coefficient equipment / system. (e.g. cranes)
6. It is used only for the manual remote control and wireless control equipment / system which must not endanger life or property during running failure, or its security risks have been eliminated
7. It should be applied in dry indoor place or in the electric appliance place.













Send your message to us
No need register, just fill in contact info below, we will reply you within 24 hours!