Sliding gate control board SL1800
Wholesale soft start and soft stop sliding door control PCB board
Packaging & Delivery
-
Product size
16.2 x 8.5 x 4 cm
-
Product weight
387.9 g
-
Certification
CE
-
Frequency
433.92MHz/318MHz/315MHz
-
Code
Rolling code
-
Working voltage
220VAC, 50Hz
-
Product size
155*77*38mm
-
Product weight
333g
-
Transmitters stored
30
-
Loading capacity
1 HP 220VAC
-
Self-learning function
Yes
-
Voltage output
AC24V
-
Working temperature
-20℃ to 60℃
-
Build-in fuse
Electric circuit(0.5A); Motor(10A), pls exchange approprite fuse according to loading capacity
-
Soft start soft stop
Yes
-
Running time
5-100S adjustable
-
Resistance of opening and closing door
No
-
Electric lock
Yes
-
Auto reverse when meet obstacle
No
-
Auto close time
5/10/30S changable
-
Installation at left or right side
Yes
-
External switch one button& three button
Both
Sliding gate control board SL1800
I. Safety Instruction
1.1 For security, please read instructions carefully before initial operation; making sure that the power is off before connection.
1.2 Please clear the memory before initial operation. (Ref.: Erasing ALL learned/memorized Transmitters)
1.3 Do not learn the remote control when motor is operating in order to avoid mis-operation.
1.4 The received signal may be interfered by other communication devices. (e.g. the wireless control system with the same frequency range)
1.5 It is used only for the manual remote control and wireless control equipment / system which must not endanger life or property during running failure, or its security risks have been eliminated.
1.6 It should be applied in dry indoor place or in the electric appliance place.
II. Technical Index
2.1 Working voltage: 220VAC/110VAC,50Hz/60Hz
2.2 Temperature range: -20℃ to 60℃
2.3 Loading capacity : 1 HP 220VAC ; 0.5 HP 110VAC
2.4 Built-in fuse: electric circuit(0.5A); Motor(10A),Please exchange appropriate fuse accoding to loading capacity
2.5 Time of soft-start : 1S ; soft-stop: 1S/2S/3S are optional
2.6 Running time: Adjustable from 5s to 100s ----S4 is to set up
2.7 Frequency: 433.92MHz
2.8 Transmitter stored: 30PCS
2.9 Output voltage: AC24V
2.10 Output with electric lock: normally-closed contact
2.11 Output with flash lamp: AC220V/AC110V
2.12 External switch (open,stop,close in a loop)
2.13 External limit ( DIP8 to select NO and NC)
2.14 External infrared (NC contact)
2.15 Auto close time is adjustable: (5S,10S,30S are optional by using DIP1,DIP2)
2.16 Soft start function is optional by DIP5
2.17 Installation at left or right side is optional by DIP6.
2.18 Single / three button control is optional by DIP7
2.19 Size: 155*77*38mm
Send your message to us
No need register, just fill in contact info below, we will reply you within 24 hours!
