Gate Photocell P5200

Gate photocell access control gate photocell P5200

Message

$??.00

Have chosenThere are no options selected.

Add To Cart Successfully!

SEND INQUIRY
LIVE
Gate Photocell P5200

Gate Photocell P5200

Gate photocell access control gate photocell P5200

  • Item No.P5200
    MOQ60 Set
  • Size 11 x 9 x 4 cm
    Weight139 g
  • Packing Size / qty 38*37*20 cm / 60Set
    G.W / N.W8.5 / 6.9 kg
Trade Assuranceprotects your orders
Payments:
Order protection service which protects online orders when payment is made through Alibaba's Trade Assurance. Learn More
Trade Assurance reduces risks in:
Product Quality On-Time Shipment

If you have your own design, please contact us, there will have a professional customer service to communicate with you.

Don't have your files right now?No worries, Check out our art tips for more information.

If over 500pcs, mass production will start until pre-production sample has been approved.

Est. 7 days production

Product details
Angle of opposite emission ≤5°
CertificationCE
Color Dark purple
Internal Rotation System Adjustable Angel Angle adjustment of PCBA ±90°
IP Level IP54
Loading capacity 1A/30VDC
Product size 100*40*35mm
Product weight 107g
Receiver range ≥15m
Wavelength940nm
Working current Emitter: ≤8mA; receiver: ≤30mA
Working temperature -20℃ to 60℃
Working voltage 12-24 VAC/DC

Packaging & Delivery

Selling Units:
Set
Single package size:
11 x 9 x 4 cm
Single gross weight:
139 g
Packing size:
38 x 37 x 20 cm
Packing gross weight:
8.5 g
Packing net weight:
6.9 g
Packing quantity:
60  Set

Gate Photocell P5200

I.  Technical Specification 

1. Working voltage: 12~24VAC/DC 
2. Working current(24VDC):emitter: ≤8mA    receiver: ≤30mA
3. Photocell wavelength: 940nm
4. Angle of emission: ≤±5°
5. Receiving range: ≥12m
6. Angel adjustment of PCBA: ±90°
7. Working temperature: -20℃~+60℃
8. Relay contact loading capacity: 1A/30VDC
9. Size: 100*40*35mm
10. Waterproof level: IP54
11. Weight: 107g

 

II.  Safety Instruction

1. For security, please read the user manual carefully before initial operation;
2. This photocell is without any fuse, so Please make sure the power is off before installation;
3. This product is only used for the equipment which will not cause life or property hazards when a breakdown happens or its security risks have been already eliminated;
4. Please guarantee the products used in effective working range.

 

III.  Picture Display

 

IV.  Installation instruction

4.1 Receive module JP2 in above picture (PR5200) is the option switch for NO and NC of photocell switch.
  4.1.1 When toggle switch JP2 at NC, it is normally open without power
  4.1.2 When toggle switch JP2 at NO, it is normally close without power
4.2. Installation
  4.2.1 The photocells should be installed more than 20cm above the ground (to avoid reflection), and the distance between emitter  and receiver should be more than 50cm.
  4.2.2 End user should install the photocell receiver on the back of the direct sunlight or other strong light source (±5º) to keep photocell work well steadily.
  4.2.3 Avoid installing other infrared photocell emitters within the effective distance of receiver
  4.2.4 If the end user need to install other photocells in one same straight line , the receivers could be installed in the two ends and the emitters could be back-to-back installed
  4.2.5 Stable installation could avoid the signal of emitter and receiver skewing due to lightly vibrate and the malfunction.
  4.2.6 When the product is installed in some place with angle , end user could adjust the PCBA to make the installation better .
  4.2.7 Connecting power after checking no error of connecting lines, keep the CAP of emitter and receiver align, receiver LED off; When they are not align, receiver LED on. 
  4.2.8 Connecting power after checking no error of connecting lines, when toggle switch JP2 at NC, keep the CAP of emitter and receiver align, NC/NOconnect; When the CAP of the emitter and receiver are blocked by obstacle, NC/NOdisconnects. When toggle switch JP2 at NO, the state of NC/NO  is opposite to the above phenomenon.

 

HILAND TECHNOLOGY
16 YEARS EXPERIENCE WITH HIGH QUALITY ASSURANCE
Established in March, 2004, Hangzhou Hiland Technology Co., Ltd is a professional designer and qualified manufacturer for automatic control systems. Hiland serve programmable wireless transmitter, receiver, tubular motor receiver, sliding gate control board, roller shutter control board ,flash lamp, photocell and wireless keypad. Hiland brand products with unique design have been approved by ISO9001-2008, CE(EMC,LVD,RF),C TICK,EN12978,ROHS,etc. strict requirements, and sell well in Europe, Asia, Middle east, North America, etc.Hiland have improved SAMSUNG SMT machine and soldering machine, ICT test, FCT test to guarantee PCBA with high quality.
OUR ADVANTAGE
Reseach and development
Export-oriented manufacturing enterprises, independent research and development, its own brand.
Advanced technology
Can be programmed to a variety of advanced products, to ensure the production of high quality.
Authority authentication
Have been approved by ISO9001-2008, CE(EMC,LVD,RF),C TICK,EN12978,ROHS,etc. strict requirements.
FACTORY PICTURES
CERTIFICATION SIGNS

 

No need register, just fill in contact info below, we will reply you within 24 hours!

Enter the code in the box below:

Captcha