Group tubular motor controller TM6299

Series-type tubular motor receiver or automatic door/gate

Message

$??.00

Have chosenThere are no options selected.

Add To Cart Successfully!

SEND INQUIRY
Group tubular motor controller TM6299

Group tubular motor controller TM6299

Series-type tubular motor receiver or automatic door/gate

Item No. TM6299
MOQ 24 UNIT

Group tubular motor controller TM6299

Series-type tubular motor receiver or automatic door/gate

Packaging & Delivery

  • Product size

    23 x 20 x 7 cm

  • Product weight

    980 g

  • Product size

    18*15*6cm

  • Product weight

    980g

I. Safety Precautions 
For safety reasons, when using this product for the first time, please carefully read the instructions and make sure to disconnect the power supply before connecting. 
2. Please clean the storage area when using it for the first time. 
3. Try not to learn while the motor is running to avoid any accidental operation. 
4. The signals received by this product may be affected by other communication devices (for example, wireless control systems operating within the same frequency range). 
5. It is prohibited to use this product for remotely controlling high-risk equipment/systems (such as cranes). 
6. This product is only used for manual remote control and wireless receiving devices/systems. In the event of a malfunction, such devices/systems will not cause harm to life or property; these devices/systems have eliminated potential safety hazards. 


II. Technical Parameters 
Working voltage: 110VAC, 50/60Hz 
2. Temperature range: -20℃ to 60℃ 
3. Load capacity: 2 horsepower, 250 volts 
4. Built-in fuse: 10A, 0.5A (for the circuit) 
5. Working frequency: 433.92 MHz 
6. Storage for remote control: 30 units 
7. It can control two motors simultaneously (both motors can work at the same time, stop at the same time, be operated in intermittent mode, and the linkage can be adjusted). 
8. The motor has a self-check function (automatically checking whether the motor is properly connected) before startup. 
9. When one of the motors gets too hot, both motors will stop operating simultaneously. 
10. The maximum operating time of the motor can be set to 5 to 100 seconds (set by the S3 button) 
11. Equipped with LED lighting indication function (the LED lights up when the motor is running, and goes off when the motor stops) 
12. With an external PVC button - Up, Stop, Down 
13. Dimensions: 180*61*150

 

 

 

Send your message to us

No need register, just fill in contact info below, we will reply you within 24 hours!