Tubular motor receiver TM5030
High quality window controller white tubular motor receiver TM5030
Packaging & Delivery
-
Product size
11 x 7 x 3 cm
-
Product weight
147 g
-
CTN. Spec
38*38*20 cm / 108pcs
-
G.W/N.W
14.5 / 13.5 kg
-
Certification
CE/RoHS
-
Frequency
433.92MHz
-
Code
Rolling code
-
Color
White
-
Working voltage
220V, 50HZ
-
Product size
93*57.5*26mm
-
Product weight
125g
-
Transmitters stored
30pcs
-
Suitable tubular motor
35mm, 45mm, 55mm, 59mm
-
Loading capacity
0.5HP, 240VAC
-
Self-learning function
Yes
-
Working temperature
-20℃ to 60℃
-
Build-in fuse
10A
-
Running time
100S
-
External switch one button& three button
No
-
Control
One or three buttons adjustable
-
Operation
Deadman/Impulse adjustable
-
Connect with
No
-
Installation position
outside type
-
With push buttons
Yes
Tubular motor receiver TM5030
1. Safety Instruction
1.For security, please read the instructions carefully before initial operation;making sure that the power is off before connection.
2.The received signal may be interfered by other communication devices. (e.g. the wireless control system with the same frequency range)
3.It is forbidden to control the high-risk coefficient equipment / system.
4.It should be applied in dry indoor place or in the electric appliance place.
2. Specification
1.Working voltage：220V，50HZ
2.Loading capacity：0.5HP，240VAC
3.Working frequency：433.92MHZ
4.Code：Rolling code
5.Built-in fuse：10A
6.Temperature range：-20℃ to 60℃
7.Size：93*57.5*26mm
8.Weight：131g
9.Self-learning function
3. learning and deleting remotes by receiver
1. Learn transmitter:Press the learning button on the panel,LED turns into red and gets into learning state;press the same buttontwice on the same transmitter,LED blinks for a while and turns into green shows transmitte has been learned successfully.
2. Delete transmitter:Continue pressing the learning button (about 8s) until LED turns green then release the learning button, LED turns red (about 1s) then turns green. It indicates that the erasing process is successful
4. Operational process
4.1 Three button control system with transmitter and non-Latch model Button 1,2,3 in transmitter is in correspondence with open, close and stop.
4.2 Three button control with transmitter and latch model Motor works clockwise when keep pressing button 1;Motor works anticlockwise when keep pressing button 2;Motor stops when releasing button
4.3 Single button control system and non-Latch model "Press-Open(motor works clockwise), press-stop, press-close(motor works anti clockwise),press-stop,and so on in a loop. Single-button control is only effective to the learned button; if a new button of transmitter learned into the control panel, the formal one is useless. (e.g.: if learned button ① at first, and then button ② or ③, the former button ① becomes invalid)."
4.4 Single button control and latch model
Motor works clockwise/anticlockwise when keep pressing the button; motor stops when releasing.
５. ＮＯＴＥ
1．Single-button control refers to single button in transmitter; ▲ ■ ▼ in control panel is in correspondence with open, close and stop.
2. Max running time means that the motor’s maximum running time at a time is 100S; the motor stops immediately if longer than 100S.
3. ▲ ■ ▼ in control panel and OPEN STOP CLOSE button in transmitter are in correspondence with open, close and stop.
Send your message to us
No need register, just fill in contact info below, we will reply you within 24 hours!
