Tubular Motor Receiver TM5811

auto control system tubular motor receiver TM5811

Message

$??.00

Have chosenThere are no options selected.

Add To Cart Successfully!

SEND INQUIRY
Tubular Motor Receiver TM5811

Tubular Motor Receiver TM5811

auto control system tubular motor receiver TM5811

Item No. TM5811
MOQ 64 PCS

Tubular Motor Receiver TM5811

auto control system tubular motor receiver TM5811

Packaging & Delivery

  • Product size

    16.1 x 10.3 x 4.5 cm

  • Product weight

    293 g

  • CTN. Spec

    38*38*20 cm / 30PCS

  • G.W/N.W

    8 / 7.2 kg

  • Certification

    CE

  • Frequency

    433.92MHz

  • Code

    Rolling code

  • Color

    Black

  • Working voltage

    85 -265 VAC (110VAC/60HZ/220VAC /50HZ is optional according to motor)

  • Product size

    150*100*40mm

  • Product weight

    242g

  • Transmitters stored

    30pcs

  • Suitable tubular motor

    35mm, 45mm, 55mm, 59mm, 64mm, 92mm

  • Loading capacity

    1HP/230VAC or 0.5HP/110VAC

  • Self-learning function

    Yes

  • Working temperature

    -20℃ to 60℃

  • Build-in fuse

    10A

  • Running time

    5-100S adjustable

  • External switch one button& three button

    One or three buttons control

  • Control

    One or three buttons control

  • Operation

    Deadman/Impulse adjustable

  • Connect with

    Photocell,flash lamp,external switch

  • Installation position

    outside type

  • With push buttons

    Yes

1. Learning transmitters:Press the learning button in the control board, LED is on, enters into the learning process; Press the same button twice, LED blinks for several times, then off. The learning process is successful.  
2. Use the transmitter that already has been learned as old transmitter, press button 1 and button 2 at the same time. Then press button 2 to let it enters into the learning process. Press the same button on the new transmitter twice. The learning process is finished. In this way new transmitter can be learned without pressing the learning button on the control board.
3. Erasing transmitter: Press the learning button, continue pressing for 8s until LED turns off; Release learning button, LED will be on (about 1s) and then off; the erasing process is successful. 
4. Button 1,2,3 in transmitter is in correspondence with open, close and stop.(The same as button on controller and the external three button control); Single-button control is only effective to the learned button(The same as external single circle control).If a new button of transmitter learned into the control panel, the formal one is useless

Send your message to us

No need register, just fill in contact info below, we will reply you within 24 hours!