auto gate system tubular motor receiver TM5202
door/window control tubular motor receiver
Packaging & Delivery
-
Product size
12 x 7.6 x 4.6 cm
-
Product weight
404 g
-
CTN. Spec
36.5*33.5*16 cm / 42pcs
-
G.W/N.W
15.3 / 14.3 kg
-
Certification
CE/RoHS
-
Frequency
433.92MHz
-
Code
rolling code
-
Color
White
-
Working voltage
220V AC, 50Hz
-
Product size
113*74*44mm
-
Product weight
338g
-
Transmitters stored
30
-
Suitable tubular motor
35mm，45mm，55mm，59mm，64mm，92mm，115mm
-
Loading capacity
2HP, 250V
-
Self-learning function
yes
-
Working temperature
-20℃ to 60℃
-
Build-in fuse
electrocircuit (0.5A), motor (10A), please exchange appropriate fuse according to loading capacity
-
Running time
100S
-
External switch one button& three button
No
-
Control
one button control
-
Operation
Impulse
-
Connect with
photocell
-
Installation position
outside type
-
With push buttons
Yes
I. Specification
1. Working voltage: 220V AC, 50Hz
2. Loading capacity: 2HP，250V
3. Working frequency: 433.92MHz
4. Built-in fuse: electrocircuit (0.5A), motor (10A), please exchange appropriate fuse according to loading capacity
5. Transmitters stored: 30
6. Temperature range: -20℃ to 60℃.
7. Self-learning function
8. Size: 113×74×44MM
Ⅱ. Safety Instruction
1. For security, please read the instructions carefully before initial operation; making sure that the power is off before connection.
2. Please clear the memory before initial operation. (Ref. Erasing ALL learned/memorized Transmitters）
3. Do not learn the remote control when the motor is operating in order to avoid mis-operation.
4. It should be applied in dry indoor place or in the electric appliance place.
Ⅳ Operation
1. Learning / memorizing transmitters: Press the learning button on the panel,LED turns into red and gets into learning state;press the same button. twice on the same transmitter,LED blinks for a while and turns into green shows transmitter has been learned successfully.
2. Erasing Transmitter：Continue pressing Learning Button for 8 seconds,turn LED turn Green, then release transmitters,the learning button,LED turn Red to begin erase the learned .until LED turn green, the Erase process is successful.
3. Photocell :If no photocell,the photocell switch should be connected with short lines; or the door cannot be closed.
Send your message to us
No need register, just fill in contact info below, we will reply you within 24 hours!
