LED Gate Flash Lamp F5096 with bracket
LED type With bracket
- Item No.F5096MOQ60 pcs
- Product size10.5 x 10.5 x 13.5 cmProduct weight253 g
- CTN. Spec 54*44*29 cm / 40pcsG.W/N.W16 / 15.18 kg
Choice
If you have your own design, please contact us, there will have a professional customer service to communicate with you.
Don't have your files right now?No worries, Check out our art tips for more information.
If over 500pcs, mass production will start until pre-production sample has been approved.
Est. 7 days production
LED Gate Flash Lamp F5096
I. Safety Instruction
1. For security, please read the user manual carefully before initial operation;
2. Please be sure the power is off before connecting, the product is produced without fuse;
3. This system must not endanger life or property during the running failure or its security risks have been eliminated
II. Technical Specification
1. Working voltage:85-265VAC or 12-24VAC/DC
2. Loading capacity:<2.5W
3. Flicker Frequency:1HZ
4. Working temperature:-20º~+60℃
5. IP Level: IP54
6. Size:φ90* 125mm
III. Connecting Instruction
1. Connect the wire with J1 if power supply is 85-265VAC
2. Connect the wire with J2 if power supply is 12-24VAC/DC
3. J3 is for connecting the antenna to extend the effective distance of controller
IV. Instructions
4.1 LED will flicker in 1HZ after power on
4.2 JP1 switch
It’s the switch for switching LED in flickering or lighting,
When JP1 at FLASH, LED will flicker in 1Hz after power on;
When JP1 at NO FLASH, LED will light after power on
Send your message to us
No need register, just fill in contact info below, we will reply you within 24 hours!