Tubular Motor Receiver TM5151
Functional rolling/fixed code gate tubular motor receiver TM5151
Packaging & Delivery
-
Product size
17.5 x 12.5 x 4.5 cm
-
Product weight
504 g
-
CTN. Spec
38*38*20 cm / 24PCS
-
G.W/N.W
14.5 / 11.52 kg
-
Certification
CE/RoHS
-
Frequency
433.92MHz
-
Code
Rolling code
-
Color
Black
-
Working voltage
220VAC, 50HZ
-
Product size
113*74*44mm
-
Product weight
437g
-
Transmitters stored
30
-
Suitable tubular motor
35mm, 45mm, 55mm, 59mm, 64mm, 92mm, 115mm,
-
Loading capacity
2HP, 240VAC
-
Self-learning function
Yes
-
Working temperature
-20℃ to 60℃
-
Build-in fuse
electrocircuit (0.5A), motor (10A)
-
Running time
100S
-
External switch one button& three button
three buttons
-
Control
three buttons control
-
Operation
Deadman/Impulse
-
Connect with
photocell, external switch
-
Installation position
outside type
-
With push buttons
Yes
Tubular Motor Receiver TM5151
I. Specification
1 .Working voltage: 220VAC,50HZ
2. Loading capacity: 2HP，240VAC
3. Working frequency: 433.92MHz
4. Built-in fuse: electrocircuit (0.5A), motor (10A)
5. Temperature range: -20℃ to 60℃.
6. Code:Rolling code
7. Size: 113×74×44MM,power wire 1500mm
Ⅱ. Safety Instruction
1. For security, please read the instructions carefully before initial operation; making sure that the power is off before connection.
2. The received signal may be interfered by other communication devices. (e.g. the wireless control system with the same frequency range)
3. It is forbidden to control the high-risk coefficient equipment / system. (e.g. cranes)
4. It should be applied in dry indoor place or in the electric appliance place.
III. Operation
1 Learning / memorizing transmitters:
Press the learning button on the panel,LED turns into red and gets into learning state;press the same button twice on the same transmitter,LED blinks for a while and turns into green shows transmitter has been learned successfully.
2. Erasing Transmitter：
Continue pressing the learning button (about 8s) until LED turns green then release the learning button, LED turns red (about 1s) then turns green. It indicates that the erasing process is successful.
Send your message to us
No need register, just fill in contact info below, we will reply you within 24 hours!
