• Safety Instruction

1. The industrial gate operator should be installed and put into operation by qualified personnel. Otherwise, serious personal injury or property damage may occur.

2. Installation and wiring must be in accordance with the construction standards and electrical standards, diameter ≧ 1.5m㎡ ; power must have a reliable grounding, ground wire must be reliably connected to the place labeled ground tab, ground lead on the power line is prohibited to be removed; front end of incoming power line should be installed with electrical leakage protector which is in line with national standards.

3. This industrial gate operator is only allowed to be installed on well-balanced gate which has balance spring, otherwise machine may be damaged due to overload.

4. Gate should be flexible and run without stagnation; The end of gate lead rail must be installed with mechanical stop block and buffering booster to prevent the gate from rolling out.

5. Control unit should be installed on the wall or a post of 1.4 meters away from the ground where the operation of gate can be observed to prevent children from inadvertently touching. Keep the remote control well, do not allow children to touch or play in case of any danger. Do not use the remote control when you didn’t see the operation of gate.

6. Before repairing and moving the industrial gate operator and its control unit, please cut off the power supply, and make sure that the gate has been locked and there is no any risk of falling due to self-weight is null.

7. Pedestrian and vehicle are prohibited to go through or stay when the gate is running.

8. Hand-pulled chain is prohibited to be pulled during the operation of the industrial gate operator to prevent the motor from damaged.

9. To ensure the safety of pedestrian and vehicle, it’s recommended to install the infrared protection and airbag protection devices.

10. Please check the safety protection devices and the gate running condition from time to time to ensure the safety and stability of gate operation.

• Technical Characteristics