110V AC Sliding gate control board SL0730
sliding gate control PCB board SL0730
Packaging & Delivery
-
Product size
17.5 x 12.5 x 4.5 cm
-
Product weight
540 g
-
Certification
CE
-
Frequency
433.92MHz
-
Code
Rolling code
-
Working voltage
110VAC, 60Hz
-
Product size
140*103*38mm
-
Product weight
451g
-
Transmitters stored
30
-
Loading capacity
1HP 110 VAC
-
Self-learning function
Yes
-
Voltage output
AC24V
-
Working temperature
-20℃ to 60℃
-
Build-in fuse
Electric circuit(0.5A); Motor(10A), pls exchange appropriate fuse according to loading capacity
-
Soft start soft stop
Yes
-
Running time
5-100S Adjustable
-
Resistance of opening and closing door
Yes
-
Electric lock
No
-
Auto reverse when meet obstacle
Yes
-
Auto close time
5/10/30S changable
-
Installation at left or right side
Yes
-
External switch one button& three button
Both
Sliding gate control board SL0730
I. Safety Instruction
1.1 For security, please read instructions carefully before initial operation; making sure that the power is off before connection.
1.2 Please clear the memory before initial operation. (Ref.: Erasing ALL learned/memorized Transmitters)
1.3 Do not learn the remote control when motor is operating in order to avoid mis-operation.
1.3 The received signal may be interfered by other communication devices. (e.g. the wireless control system with the same frequency range)
1.4 It is used only for the manual remote control and wireless control equipment / system which must not endanger life or property during running failure, or its security risks have been eliminated.
1.5 It should be applied in dry indoor place or in the electric appliance place
II. Technical Index
2.1 Working voltage: 110VAC,60Hz
2.2 Temperature range: -20℃ to 60℃
2.3 Loading capacity : 1HP 110VAC
2.4 Built-in fuse: electric circuit(0.5A); Motor(10A),Please exchange appropriate fuse accoding to loading capacity
2.5 Soft-start time:1S. Soft-stop time = 127s - quick running time
2.6 Qucik running time: Adjustable from 3s to 120s ----TP3 is to set up
2.7 Frequency: 433.92MHz
2.8 Transmitter stored: 30PCS
2.9 Output voltage: AC24V
2.10 Output with flash lamp: AC110V
2.11 External switch (open,stop,close in a loop)
2.12 External limit ( DIP1 to select NO and NC)
2.13 External infrared (NC contact)
2.14 Resistance of opening and closing door is adjustable
2.15 Auto close time is adjustable: (5S,10S,30S are optional by using DIP7,DIP8)
2.16 Latch and non-latch remote system are optional by DIP4
2.17 Installation at left or right side is optional by DIP3.
2.18 Single / three button control is optional by DIP2
2.19 Size: 140*103*38mm
III. NOTES
1. Man-made resistance is needed after adjusting resistance,in order to make sure the resistance is appropriate or not.
2. Open and stop resistance shall be examined regularly.
Send your message to us
No need register, just fill in contact info below, we will reply you within 24 hours!
